| |
|
Remote Control incl. 5 meter cable
The remote control makes it easy for you to make printouts from the driver's seat while running the engine at high rpm or making adjustments. The OPUS 20 software includes a test where the gas readings at idle and at high rpm are printed in the same printout. The remote control is supplied with a 5 meter cable and is connected to the "Accessories" connector on the OPUS 20 rear panel.
Article number: 526912 |
| |
|
| |
|
|
Radio Remote Control
The Radio Remote Control enables you to make printouts from the driver's seat while running the engine at high rpm or making adjustments. The OPUS 20 software includes a test where the gas readings at idle and at high rpm are printed in the same printout. The Radio Remote Control functions within 400 meters reach and can be coded separately so that several remote controls can be used in the same workshop without interference.
Article number: 526913 |
| |
|
| |
|
|
LCD Remote Control
The LCD Remote Control allows you to perform all that can be performed via the OPUS 20 displays and keys - directly from the driver's seat or by the engine. The readings are continuously displayed in the LCD display and printouts, zero adjustments, oxygen sensor tests etc. are easily accessible via the menus. The LCD Remote Control is equipped with a keyboard which enables you to enter the vehicle's registration number, model etc. This information will then be included in the printout together with the gas readings. The LCD Remote Control is supplied with a 5 meter cable and operating manual.
Article number: 526943
|
| |
|
| |
 |
Oxygen Sensor Tester
The Oxygen Sensor Tester is a helpful tool when checking the function of the car's oxygen sensor and the fuel injection system. Using the Oxygen Sensor Tester, you easily measure the voltage out from the car's oxygen sensor and obtain a graphic printout of the cycle of operation of the oxygen sensor. The Oxygen Sensor Tester is equipped with two keys that can control the voltage out of the oxygen sensor. By using this function, you can easily check if the fuel injection system responds accurately to the signals of the oxygen sensor. The Oxygen Sensor Tester works with 1 Volt as well as with 5 Volt oxygen sensors. This means that it can be used for all car models, even for the latest years. The Oxygen Sensor Tester is easily connected to the car's oxygen sensor using only two clamps. A 5 meter cable is also supplied. Article number: 526914 |
| |
|
| |
|
OPUS 40 Remote Display (B)
The Remote Display is an extra display that can be mounted up to 15 meters from the gas analyser. In this way two work places can share one analyser without having to move it around to make the displays visible from both places. Two Remote Displays can be connected to the same analyser. The Remote Display consists of a small box (295*190*51 mm) and can be mounted in the ceiling or on the wall using the supplied brace. A 10 meter cable is supplied for connecting to the gas analyser. Cables of different length can be ordered separately.
Article number: 526940 |
| |
|
| |
|
OPUS Battery RPM Adapter
The tachometer is used to measure the speed of an engine with no need to connect an induction clip or piezoelectric sensor, since measurements are made directly on the basis of the voltage across the vehicle's battery terminals. When the engine is running, this voltage does not remain perfectly steady. When studied more closely, one sees that the battery voltage oscillates slightly in proportion to the engine speed.
Article number: 526911 |
| |
|
| |
|
Gas Calibration Kit (A)(B)
The Gas Calibration Kit enables you to easily perform the gas calibration necessary every 6 months at normal use, in order to maintain maximum measurement accuracy. The Gas Calibration Kit is delivered in a small case containing a bottle of calibration gas, a valve, a flow meter, hoses for connecting to the gas analyser and instructions in English. The gas bottle will last for approx. 6 gas calibrations. Spare gas bottles can be ordered separately.
Article number: 526926
Spare gas bottle: 526927 |
| |
|
| |
|
Mobile stands (A)(B)
The mobile stand is available in two versions - with or without door. The stand is built in robust sheet metal and is equipped with four wheels of which two are lockable. The stand sides have hooks to hang cable and hose on, and and two holsters to place the probes in. A shelf is placed underneath the analyser, and below there is another space for printer, manuals etc. This space can be covered with a door.
Artikelnummer (with door): 526938 Article number (without door): 526936 Article number (door alone): 526937 |
| |
|
| |
|
Wall Fixture Kit (A)(B)
With the Wall Fixture Kit the OPUS 40 can be mounted on a wall, a column or other suitable location. The Wall Fixture Kit is turnable so that the analyzer's front panel can always face the work station. Mounting bolts are included. Article number: 526929 |
| |
|
| |
|
Extra Waterseparator
The extra waterseparator is useful when unusually large volumes of condensing water must be handled at sampling, e.g. for alcohol driven vehicles or when sampling from a very large number of vehicles during a short time period. The extra waterseparator can be mounted on the stand or other location in connection to the analyzer, and is connected to the analyzer via its existing waterseparator. The extra waterseparator is drained manually using the supplied handle.
Article number: 70015 |
